CPU - LGA1155 socket for new 2nd Generation Intel Core/Pentium/Celeron Processors - Supports Intel Turbo boost 2.0 technology - DMI 5.0GT/s CHIPSET - Intel P67 Express Chipset MEMORY - Dual-channel DDR3 memory architecture - 4 x 240-pin DDR3 DIMM socket support up to 32GB* - Support DDR3 1333/1066 SDRAM EXPANSION SLOT - 1 x PCI Express x16 Gen2.0 slot - 3 x PCI Express x1 slots STORAGE - Support by Intel H67 • 4 x Serial ATA 3.0Gb/s devices • 2 x Serial ATA 6.0Gb/s devices • RAID0, RAID1, RAID5, RAID 10 configuration AUDIO - Realtek ALC892 8-Ch High Definition audio CODEC - Compliant with HD audio specification LAN - RealTek 8111EL Gigabit Fast Ethernet NIC REAR PANEL I/O - 1 x PS/2 keyboard/mouse combo port - 1 x D-sub(VGA) - 1 x DVI Port - 1 x RJ45 LAN connector - 1 x Audio port (Line-in, Line-out, Mic-in) - 2 x USB 3.0 ports compatible to both USB 3.0 / 2.0 devices - 6 x USB 2.0 ports INTERNAL I/O CONNECTORS & HEADERS - 1 x 24-pin ATX Power Supply connector - 1 x 4-pin 12V Connector - 1 x 4pin CPU_FAN connectors - 1 x 3-pin PWR_FAN connector - 1 x 3-pin SYS_FAN connector - 1 x Speaker header - 1 x Front panel switch/LED header - 1 x Front panel audio header - 1 x SPDIF out header - 1 x Clear CMOS header - 1 x Serial Header(COM) - 1 x Parallel Header - 4 x SATA 3Gb/s connectors - 2 x SATA 6Gb/s connectors - 1 x USB 2.0 header support additional 2 USB ports - 1 x Chassis intrusion header - 2 x USB 3.0 headers support additional 4 USB ports USB - Support by 1 ETRON USB3.0 Controllor • Up to 2 USB3.0/2.0 ports - Up to 12 USB 2.0/1.1 ports SYSTEM BIOS - AMI BIOS with 32MB SPI ROM - Supports Plug and Play, STR (S3) / STD (S4) , Hardware monitor, Multi Boot - Audio, LAN, can be disabled in BIOS - F7 hot key for boot up devices option - Support over-clocking - Support eJIFFY - Support eBLU - Support eDLU - Support eSF - Support ECS M.I.B III Utility FORM FACTOR - Micro-ATX Size, 244mm*220mm Please do not forget to check with our site as often as possible in order to stay updated on the latest drivers, software and games. Note: Try to set a system restore point before installing a device driver. It will help you restore system if installed driver not complete.